ATI Technologies Online README.1ST Feb 22, 1993
                   -----------------------------------------------

          INTRODUCTION
          --------------------

          The drivers enclosed in this archive are designed to run with
          Microsoft Windows 3.1 and ATI MACH32 cards. 
          
          The supplied drivers are for windows ONLY! 

          It is important that Windows be previously loaded and your
          card configured using the INSTALL program from your existing
          ATI Disk1, or in your MACH32 directory.

          This is a Offical Release, 1.5(59) and add's additional features
          within the FLEXDESK panel including Crystal Fonts and additional
          24 bit drivers.


        INSTALLATION
        -----------------

          Run the INSTALL.BAT batch file specifying the path to your
          Windows directory.

             Example:

             INSTALL C:\WINDOWS <enter>

          The INSTALL.BAT file will search your Windows directories for
          existing ATI Mach 32 drivers and prompt you to Overwrite as
          required. Once  the files are on your hard disk we can proceed
          to instruct windows to use them.


         GETTING THE DRIVERS INTO WINDOWS
         --------------------------------------------------

             The following procedure MUST be executed outside of Windows and
             CANNOT be accomplished through a DOS box. 
          
          1) Change to your Windows directory. DO NOT RUN WINDOWS.

             Example: CD \WINDOWS

             NOTE: If your Windows directory is not C:\WINDOWS, then specify
                        that path you are using (ie. C:\WIN31)

          2) Run SETUP.

          3) Highlight DISPLAY on the SETUP menu using the cursor keys and
          press ENTER.

          4) Using the down arrow key, look through the list of available
          drivers. There should be only one driver. ATI mach32 driver 
          (Both the Crystal Font and MACH32 drivers are now integrated into
           the ATI mach32 driver)

          5) Highlight the ATI mach32 driver and Press ENTER. 

          6) Press ENTER. 
              ("ACCEPT THE CONFIGURATION AS SHOWN ABOVE" should be
               highlighted)

          7) At this point, Setup may ask one of two things:

             a) SETUP is asking for a Microsoft Windows disk.
                -> Insert the diskette(s) SETUP asks for. Once all
                   necessary files are copied, SETUP will exit to
                   DOS.

             b) SETUP will ask whether to keep or replace the current
                driver
                -> Press ENTER to keep the current driver. Setup may
                   then ask for Windows diskettes. Insert the diskette(s)
                   SETUP asks for. Once the necessary files are copied,
                   SETUP will drop to DOS.

               NOTE: If SETUP asks for a Windows disk, be sure to enter
               in the input box, the drive in which you have inserted the
               disk.

          Using the MACH32 Utilities
          -------------------------------

          1) Run Windows.

           Windows will normally come up at 640 x 480.

          2) Locate the MACH32 GROUP, and Double-Click on the README ICON
             
              Please take a few minutes to familiarize yourself with this
              file, it contains a lot of information, that may save you a
              phone call.

          3) Click on the FLEXDESK ICON, and select the Help button for
             information the panel's usage.

          In some case's the initial display may not show the Mach32 Group.
          It may be hidden just off the PROGRAM MANAGER's viewing area.
          Scrolling across will normally bring it into view.



          If still unable to find the Mach32 group:
          -------------------------------------------------

          1) From the Program Manager menu bar, select FILE and then RUN

          2) Enter File name as C:\WINDOWS\M32PANEL.EXE 
                                           (or applicable Windows Directory)

              The Flexdesk panel should now be visible.

          3) Click on the HELP button for information on the FLEXDESK
             Control Panels usage

          4) Use Windows! The driver and it's utilities are now installed!

            If you have difficulties or have any questions, please feel free
            to call ATI Customer Support for assistance.

                 ATI Customer Support: (416) 756-0711 9am-5:30pm EST 
                                 FAX: (416) 756-0720
                          Compuserve: GO ATITECH